> HOME
> ONLINE TESTS
> JOBS
*new
> DISCUSSION
(COMING SOON)
> CONTACT US
CSWIP 3.1 Test 5:
Q. 1/30: You see a welder using an oxy-acetylene flame with a long feathered inner cone. What would be the effect of this on carbon steel?
The weld would be hard and brittle
The weld could be too soft
There will be no effect on the weld
The weld will have undercut
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 1/30
Test Progress : 3.33%
Q. 2/30: What is the thickness of a fillet weld ( equal leg lengths )?
The distance from the toe to the face.
The distance from the root to the face centre.
The distance from the root to the toe.
The distance from toe to toe.
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 2/30
Test Progress : 6.67%
Q. 3/30: Weld Joint in which the parent material and weld metal have no significant differences in mechanical properties and/or chemical composition
Dissimilar Joint
Homogeneous Joint
Heterogeneous Joint
None Of These
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 3/30
Test Progress : 10.00%
Q. 4/30: What is the thickness of a fillet weld ( equal leg lengths )?
The distance from the toe to the face.
The distance from the root to the face centre.
The distance from the root to the toe.
The distance from toe to toe.
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 4/30
Test Progress : 13.33%
Q. 5/30: What is the thickness of a fillet weld ( equal leg lengths )?
The distance from the toe to the face.
The distance from the root to the face centre.
The distance from the root to the toe.
The distance from toe to toe.
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 5/30
Test Progress : 16.67%
Q. 6/30: Slag inclusions may be present in
Manual metal arc welds
Metal inert gas welds
Metal active gas welds
All welds
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 6/30
Test Progress : 20.00%
Q. 7/30: A Fabrication procedure calls for the toes of all welds to be blended in by grinding. The reason for this is to:
Make the weld suitible for liquid (dye) penetrant inspection.
Improve fatigue life.
Reduce residual stresses
Improve the general appearance of the welds
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 7/30
Test Progress : 23.33%
Q. 8/30: According to AWS 2.4 a weld symbol for the other side is placed:
Above the dashed line
Below the dashed line
Above the solid line
Below the solid line
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 8/30
Test Progress : 26.67%
Q. 9/30: The highest and lowest heat input positions are considered to be:
PB highest; PA lowest.
PE highest; PC lowest.
PD highest; PB lowest.
PF highest; PG lowest.
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 9/30
Test Progress : 30.00%
Q. 10/30: When manual metal arc welding is being carried out on an open construction site, which group of welders are most likely to require continuous monitoring?
Concrete shuttering welding teams
Pipe welding teams
Plater welders
Plant maintenance welders
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 10/30
Test Progress : 33.33%
Q. 11/30: A solid inclusion in a weld may be:
Entrapped slag
Entrapped gas
Lack of inter-run fusion
None of the above.
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 11/30
Test Progress : 36.67%
Q. 12/30: Which type of electrode is used for stovepipe welding for overland pipeline construction
Rutile
Cellulosic
High recovery rutile
Acid-rutile
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 12/30
Test Progress : 40.00%
Q. 13/30: You observe centerline cracking a weld that as been made one of five work stations each making similar components. The first action to take is:
A) Impound all welding consumables
B) Report the occurrence to high authority
C) Stop all welding
D) Call for full NDT checks
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 13/30
Test Progress : 43.33%
Q. 14/30: EN ISO 5817 (Level C) specifies that the limit for the diameter (D) of a single pore in a weld is: D<0.3s, but max. 4mm where s=material thickness. For which of the following situations is the pore acceptable?
S=20mm, measured pore diameter = 5mm
S=15mm, measured pore diameter = 4.5mm
S=10mm, measured pore diameter = 3mm
S=10mm, measured pore diameter = 3.5mm
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 14/30
Test Progress : 46.67%
Q. 15/30: The Boundary between the weld metal and HAZ
Weld Zone
Weld Junction
Haz
None Of these
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 15/30
Test Progress : 50.00%
Q. 16/30: What type of covering will an electrode have that is suitable for welding 60mm C-Mn steel and can give good weld metal toughness at -50ºC?
Rutile
Basic
Cellulosic
Choice will depend on the welding position
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 16/30
Test Progress : 53.33%
Q. 17/30: Manual metal arc electrodes, stripped of flux, are being used as filler wire for TIG welding. You would object because:
The wire would be too thick
The wire is too short
It is too expensive
The weld metal composition may be wrong
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 17/30
Test Progress : 56.67%
Q. 18/30: What is the thickness of a fillet weld ( equal leg lengths )?
The distance from the toe to the face.
The distance from the root to the face centre.
The distance from the root to the toe.
The distance from toe to toe.
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 18/30
Test Progress : 60.00%
Q. 19/30: Lack of fusion imperfections are defined as?
Lack of union between two adjacent areas of material
Not cleaning out slag
Incorrect electrode manipulation in the final run
Incorrect set up
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 19/30
Test Progress : 63.33%
Q. 20/30: When welding thin plate distortion can be minimised by:
Welding from both sides
Using U preparations rather than V types
Using strongbacks
Using back-step welding
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 20/30
Test Progress : 66.67%
Q. 21/30: When manual metal arc welding is being carried out on an open construction site, which group of welders is most likely to require continuous monitoring?
Concrete shuttering welding teams
Pipe welding teams
Plater welders
Plant maintenance welders
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 21/30
Test Progress : 70.00%
Q. 22/30: Which of the following steels is considered non-magnetic?
18% Cr, 8% Ni
2.25Cr 1Mo
9%Cr, 1Mo
9%Ni
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 22/30
Test Progress : 73.33%
Q. 23/30: MIG/MAG welding has a tendency to give lack of sidewall fusion when:
Spray transfer conditions are used
100% CO2 shielding gas is used
Pulsed current is used
Dip transfer
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 23/30
Test Progress : 76.67%
Q. 24/30: When a metal regains its original shape when a stress acting upon it is removed, the metal is said to have:
Ductility
Plasticity
Malleability
Elasticity
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 24/30
Test Progress : 80.00%
Q. 25/30: For fillet welds it is normal practice in the UK and USA to measure:
Throat thickness
Leg lengths
Penetration depths
Both a and c
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 25/30
Test Progress : 83.33%
Q. 26/30: Deflection of the arc by magnetic forces that can make welding difficult to control is commonly known as:
Arc initiation
Arc misalignment
Arc blow
Arc constriction
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 26/30
Test Progress : 86.67%
Q. 27/30: The first procedure prepared for a Weld Procedure Qualification test is a:
PWPS
WPS
WPQR
WPAR
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 27/30
Test Progress : 90.00%
Q. 28/30: For radiography of a steel weld at 35mm thickness, the recommended isotope is:
Thulium 170
Ytterbium 169
Iridium 192
Cobalt 60
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 28/30
Test Progress : 93.33%
Q. 29/30: The unit of Joules would be used to measure: Tensile Strength?
True
False
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 29/30
Test Progress : 96.67%
Q. 30/30: The maximum hardness in the HAZ of a steel will increase if the:
Heat input is increased
CEV is increased
Joint thickness is decreased
Basic electrodes are used
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 30/30
Test Progress : 100.00%
Q. 31/30: To test a component for vibrational loading, a suitable mechanical test would be:
Impact
Tensile
Compressive
Fatigue
Please select an option and click submit.
.
Your answer is correct. Welldone! Click next.
Sorry, your answer is incorrect. Click next.
Submit
Previous
Next
Q 31/30
Test Progress : 103.33%
.
Select another Test
Return to categories